Honeywell Home RTH7500 Series User Manual

RTH7500 Series
Programmable Thermostat
Quick Installation Guide
Tools you will need Tools you may need
Wire stripper
Needle-nose pliers Drill and
drill bit (7/32 in)
Included in your box
Screws and
anchors
UWP
Mounting
System
(UWP)
RTH7500
Thermostat
Quick Install Guide
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Level

Honeywell Home RTH7500 Series Specifications

General

Model	RTH7500 Series
Type	Programmable Thermostat
Programmability	7-day programmable
Display	Backlit Digital Display
Hold Feature	Yes
Filter Change Alert	Yes
Change/Check Reminders	Yes
Keypad Lock	Yes
Smart Features	No
Temperature Range	40°F to 90°F
Backup Battery	Yes
Power Source	Battery-powered (2 AA batteries)

Summary

Removing your old thermostat

Installing your RTH7500 thermostat

Set date and time

System Setup

System operation settings

Fan operation settings

Program Schedule

To adjust program schedules

Instructions for modifying the thermostat's daily program schedules and setpoints.

Wiring—conventional systems

Alternate wiring (conventional systems)

Guidance for connecting wires when standard terminal labels do not match.

Wiring—heat pump

Connect wires: heat pump

Matching labeled wires to the corresponding terminals on the thermostat for heat pumps.

Alternate wiring (for heat pumps only)

Specific wiring instructions for heat pumps when standard connections are not applicable.

Advanced menu

Smart Response® Technology

Battery replacement

Setting the time

Set the date

Setting degrees Fahrenheit (F) or Celsius (C)

Alerts screen

Troubleshooting

1-year limited warranty

Customer assistance