To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Home RTH6360D1002 and is the answer not in the manual?
General| Display Type | Digital |
|---|---|
| Programmable | Yes |
| Stages | 1 Heat/1 Cool |
| Power Source | Battery |
| Compatibility | Gas, Oil, Electric |
| Dimensions | 3.5 x 4.5 x 0.9 inches |
| Product Type | Programmable Thermostat |
| Type | Digital |
| Display | Digital |
| Hold Feature | Yes |
| Filter Change Alert | Yes |
| Programmability | 7-Day |
| Temperature Range | 40°F to 90°F |
Steps to safely disconnect power and verify system shutdown.
Instructions for safely removing the old thermostat and its wires.
Warning and guidance on identifying 120/240V wires to prevent damage.
Advise to photograph wiring and use labels for future reference.
Instructions on removing any jumpers connecting terminals.
Guide to documenting wire connections to specific terminals.
Steps to disconnect wires and remove the old wall plate.
How to bundle wires and feed them through the new mounting system.
Guidance on using wall anchors for secure mounting.
Instructions for setting the R-switch and connecting R-wires based on system type.
Procedure for connecting wires to the UWP terminals.
Steps to mount the UWP and install batteries.
How to attach the thermostat unit to the mounted UWP.
Instructions to restore power to the system.
Guide to setting the current date and time on the thermostat.
Explanation of available system setup numbers and their functions.
Setting up the thermostat's weekly scheduling preferences.
Configuring settings for heat pumps and heating/cooling stages.
Adjusting automatic changeover and comfort learning features.
How to select and activate system modes like Auto, Heat, Cool, Off.
How to control fan modes like Auto and On.
Explanation of the four daily time periods for scheduling.
Step-by-step guide to editing wake, away, home, and sleep periods.
How to temporarily change the temperature setpoint.
How to permanently hold the current temperature setpoint.
Wiring instructions for conventional HVAC systems.
Matching labeled wires to thermostat terminals for heat pumps.
Specific wiring instructions for certain heat pump configurations.
Procedure to access advanced settings by holding buttons.
How to cycle through and select system setup options.
Explanation of the thermostat's learning feature for temperature control.
Guidelines for replacing thermostat batteries.
Steps to set the current time and clock format.
How to input the current date into the thermostat.
Procedure to select temperature units.
How to view and interpret thermostat alerts and icons.
Steps to snooze or dismiss active thermostat alerts.
Table defining specific error and reminder codes.
Solutions for a blank display or inability to change settings.
Troubleshooting for fan not turning on or system not responding.
Addressing issues with heat pumps providing incorrect air temperature.
Warnings about electrical shock and mercury disposal.
Information on disposing of the electronic device as HHW.
How to get help via website or phone.
