To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Home RTH2300 Series and is the answer not in the manual?
General| Display Type | Digital |
|---|---|
| Power Source | Battery (2 AA) |
| Stages | 1 Heat/1 Cool |
| Temperature Range | 40°F to 90°F (4°C to 32°C) |
| Hold Feature | Yes |
| Filter Change Alert | No |
| Programmable | Yes |
| Temperature Control | Precise Temperature Control (+/- 1 degree F) |
| Weight | 0.5 lbs |
| Compatibility | Single Stage Systems (Heat & Cool) |
Provides phone numbers and website for user assistance and wiring help.
Informs about mercury in older thermostats and recycling guidelines.
Warns against running AC in low outdoor temperatures to prevent compressor damage.
Disconnect power to the heating/cooling system before proceeding.
Step to remove the existing thermostat, leaving the wallplate attached.
Instruction to tag wires with appropriate labels before disconnecting them.
Step to detach the new wallplate from the thermostat unit.
Instructions for securing the new wallplate to the wall.
Guide for connecting labeled wires to the corresponding terminals on the wallplate.
Details on specific wiring configurations for various system types.
Steps for inserting the required AAA batteries into the thermostat.
Adjusting the fan switch based on system type (Gas/Oil vs. Electric/Heat Pump).
Attaching the main thermostat unit to the mounted wallplate.
Instruction to restore power to the heating/cooling system.
Helps determine if advanced setup is required for optimal operation.
Guides through advanced system configuration steps for specific needs.
How to navigate and modify settings within the advanced setup menu.
Explains the safety mechanism that prevents compressor damage from rapid cycling.
Description of the Set, Hold, Run, System, and Fan switches and their functions.
Explains how to read indicators for setpoint, time, temperature, and system status.
Procedure to accurately configure the current time and day on the thermostat.
Defining wake, leave, return, and sleep periods with desired temperatures.
How to temporarily adjust temperature settings without permanently altering the programmed schedule.
How to lock in a specific temperature, overriding the programmed schedule indefinitely.
How to manage the filter replacement alert on the RTH2300 model.
Instructions for replacing the thermostat's batteries when low battery warning appears.
Technical details on voltage and maximum current ratings for terminal connections.
Solutions for common problems like blank display, system non-response, and setting issues.
Details of the product's warranty terms, coverage, and limitations.
