27 69-2715EF—07
Setting advanced preferences
You can change options for a number of
system functions. Although many options,
such as language and temperature
indication settings are the same for all
setups, others depend on the type of system
you have.
1 Touch SETTINGS. The thermostat displays a
list of options.
2 Select Preferences > Advanced Preferences. The
thermostat displays the first screen of
options that you can change.
3 On each screen, make changes as
needed, then touch Next to display new
options. Repeat this step until you have
made all changes.
Tables on pages 2728 explain the
screens and options under Advanced
Preferences.
4 When you have made all changes, press
Done to save and exit.
SETTINGS
Preferences
Advanced Preferences
Next
Advanced Preferences Options (SETTINGS > Preferences > Advanced Preferences)
Screen Title Settings and Options (Options vary depending on setup.)
Scheduling Options
Select Non-programmable or Programmable. Programmable
uses default or customized programming to automatically raise
and lower temperature settings for different times of day.
Temperature Indication
Scale
Select Fahrenheit or Celsius.
Heating and Cooling
System Changeover
Select Manual or Automatic.
Number of Schedule
Periods
Select 2 Periods Per Day or 4 Periods Per Day. (see page 16).
Pre-occupancy Purge
Duration
*
Select how long the fan will run before each occupied period:
Off, 1, 2, or 3 hours.
Type of Override
*
Select Standard to maintain the programmed periods or Initiate
Occupancy to use energy-saving settings until a user presses
Start Occupancy.
Override Duration
*
Select how long to maintain temperature during an override:
110 hours or No Limit.
* These settings are only available if thermostat is configured for business.
To Next Page
Loading...
Need help?
General
