EasyManuals Logo

Honeywell Home Smart Series User Manual

Honeywell Home Smart Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
69-2715EF—07 32
If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is
blank
Check circuit breaker and reset if necessary.
Make sure power switch at heating and cooling system is on.
Make sure furnace door is closed securely.
Make sure C wire is connected (see page 5).
Cannot
change system
setting to Cool
Check that System Setup screen “Your thermostat controls” or “Your
system type” is set to match your heating and cooling equipment (see
page 29).
Fan does
not turn on
when heat is
required
Check that System Setup screen “Your fan control” is set to match your
heating equipment (see page 28).
Wait” appears
on the screen
Compressor protection feature is engaged. Wait 5 minutes for the
system to restart safely, without damage to the compressor.
Heat pump
issues cool air
in heat mode,
or warm air in
cool mode
Check your setting for System Setup screen “Type of changeover valve”
to make sure it is properly configured for your system (see page 28).
Heating or
cooling system
does not
respond
• Touch MODE to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
• Touch MODE to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
Check circuit breaker and reset if necessary.
Make sure power switch at heating and cooling system is on.
Make sure furnace door is closed securely.
If “Wait” is displayed, the compressor protection timer is on. Wait
5 minutes for the system to restart safely, without damaging the
compressor (see page 26).
Heating
system is
running in cool
mode
Check that System Setup screen “Your thermostat controls” or “Your
system type” is set to match your heating and cooling equipment (see
“System Setup Options (SETTINGS > System Setup)” on page 29).
Troubleshooting
Electrical Ratings
Terminal Voltage (50/60Hz) Max. Current Rating
WO/B 2030 Vac 1.0 A
W2 (Aux/E) 2030 Vac 1.0 A
Y Cooling 2030 Vac 1.0 A
Y2 Cooling 2030 Vac 1.0 A
G Fan 2030 Vac 0.5 A

Table of Contents

Other manuals for Honeywell Home Smart Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Home Smart Series and is the answer not in the manual?

Honeywell Home Smart Series Specifications

General IconGeneral
ConnectivityWi-Fi
Warranty1-year limited warranty
SensorsRoom temperature, humidity
DisplayTouchscreen
Energy SavingsYes
App ControlHoneywell Home app
Control MethodTouchscreen, app, voice
Power SourceBattery or C-wire
Scheduling7-day programmable
GeofencingYes
Energy Saving FeaturesScheduling, Geofencing
Remote ControlYes
Voice ControlAmazon Alexa, Google Assistant

Related product manuals