To Next PageTo Next PageWhy is "Cool On" or "Heat On" flashing on my Honeywell Home Thermostat?
If the "Cool On" or "Heat On" indicator is flashing on your Honeywell Home Thermostat, this indicates that the compressor protection feature has been activated. To resolve this, wait 5 minutes to allow the system to safely restart, preventing any damage to the compressor.
What to do if heating or cooling system does not respond to Honeywell Home T6 Pro?
If your heating or cooling system isn't responding to your Honeywell Home Thermostat, try these steps: * Ensure the system is set to Heat by pressing the Mode button. * Verify the desired temperature is set higher than the current room temperature. * Alternatively, set the system to Cool using the Mode button. * Ensure the desired temperature is set lower than the current room temperature. * Check the circuit breaker and reset it if needed. * Confirm that the power switch for the heating & cooling system is turned on. * Make sure the furnace door is securely closed. * Allow up to 5 minutes for the system to respond.
How to fix a blank display on Honeywell Home T6 Pro Thermostat?
If the display on your Honeywell Home Thermostat is blank, take the following actions: * Check the circuit breaker and reset it if necessary. * Ensure that the power switch for your heating and cooling system is turned on. * Make sure the furnace door is closed securely. * Verify that fresh AA alkaline batteries are correctly installed.
General| Model | T6 Pro |
|---|---|
| Temperature Control | Precise Temperature Control |
| Backlit | Yes |
| Operating Modes | Heat, Cool, Auto, Off |
| Fan Modes | Auto, On, Circulate |
| Weight | 0.5 lbs |
| Temperature Range | Heat: 40°F to 90°F, Cool: 50°F to 99°F |
| Warranty | 1-Year Limited Warranty |
| Programmable | Yes |
| Power Source | Battery or Hardwired |
| Energy Saving | Yes |
| Stages | Up to 3 Heat/2 Cool |
| Smart Features | Remote control via app, Geofencing, Alerts |
| Dimensions | 4.06 in. H x 4.06 in. W x 1.06 in. D |
| Change Reminders | Filter |
| Display | Touchscreen |
| Connectivity | Wi-Fi |
Steps to edit schedule periods (Wake, Away, Home, Sleep) and temperatures.
Solutions for a blank display, including checking breakers and power.
Fixes for heating/cooling system not responding, checking modes and power.
Caution about electrical shock and equipment damage during installation.
Warning to avoid rapid compressor cycling during testing to prevent damage.
Instructions for proper disposal of old controls containing mercury.
