Honeywell Home T6 Pro Series User Manual

Package Includes:
• T6 Pro Thermostat
• UWP™ Mounting System
• Decorative Cover Plate
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
T6 Pro Programmable
Thermostat
Installation Instructions
–
+
TH6320U2008,
TH6220U2000,
TH6210U2001,
Read before installing
Optional Cover Plate installation
NOTE: If Optional Cover Plate is not
required, see “UWP Mounting System
installation” on next page.
Use the Optional Cover Plate when
you need to cover paint gap from old
thermostat.
There are different cover plates
depending on when the thermostat was
manufactured.
For the square cover plate:
1. Separate the Cover Plate from
Mounting Plate.
2. Mount the Mounting Plate on to the
wall using any of the 8 screw holes.
Insert and tighten mounting screws
supplied with Cover Plate Kit. Do not
overtighten. See Figure 2. Make sure
the Mounting Plate is level.
3. Attach the UWP by hanging it on the
top hook of the Mounting Plate and
then snapping the bottom of the UWP
in place. See Figure 3.
4. Snap the Cover Plate onto the
Mounting Plate. See Figure 4.
Use supplied
screws and
wall anchors
4
3
2
1

Honeywell Home T6 Pro Series Specifications

General

Model	T6 Pro Series
Display	Touchscreen
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Warranty	5-year limited warranty
Programmability	7-day, 5-2 day, or non-programmable
Compatibility	Works with most heating and cooling systems
Power Source	Battery or Hardwired (24 VAC)
Connectivity	Wi-Fi
Thermostat Type	Programmable
Display Type	LCD
Stages	Up to 2 Heat / 2 Cool
Temperature Range (Heating)	40°F to 90°F (4.5°C to 32°C)
Temperature Range (Cooling)	50°F to 99°F (10°C to 37°C)
Mounting	Wall
Remote Access	Yes
Alerts	Filter change
Geofencing	Yes (with Wi-Fi model)