Honeywell Home T6 Pro TH6320U2008 User Manual

Package Includes:
• T6 Pro Thermostat
• UWP™ Mounting System
• Decorative Cover Plate
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
T6 Pro Programmable
Thermostat
Installation Instructions
–
+
TH6320U2008,
TH6220U2000,
TH6210U2001,
Read before installing
Optional Cover Plate installation
NOTE: If Optional Cover Plate is not
required, see “UWP Mounting System
installation” on next page.
Use the Optional Cover Plate when
you need to cover paint gap from old
thermostat.
There are different cover plates
depending on when the thermostat was
manufactured.
For the square cover plate:
1. Separate the Cover Plate from
Mounting Plate.
2. Mount the Mounting Plate on to the
wall using any of the 8 screw holes.
Insert and tighten mounting screws
supplied with Cover Plate Kit. Do not
overtighten. See Figure 2. Make sure
the Mounting Plate is level.
3. Attach the UWP by hanging it on the
top hook of the Mounting Plate and
then snapping the bottom of the UWP
in place. See Figure 3.
4. Snap the Cover Plate onto the
Mounting Plate. See Figure 4.
Use supplied
screws and
wall anchors
4
3
2
1

Honeywell Home T6 Pro TH6320U2008 Specifications

General

Brand	Honeywell Home
Model	T6 Pro TH6320U2008
Category	Thermostat
Language	English

Summary

Thermostat Installation Guide

Optional Cover Plate Installation

Instructions for installing an optional cover plate to hide paint gaps from old thermostats.

UWP Mounting System Installation

Steps for installing the Universal Wiring Plate (UWP) onto the wall.

Power Options and Wiring

Setting Slider Tabs for Transformer Systems

Guide to setting the R Slider Tab for differentiating transformer systems.

Wiring Terminal Designations Explained

Explanation of terminal labels on the thermostat and UWP for wiring.

Conventional System Wiring

Heat Pump System Wiring

Thermostat Mounting and Basic Setup

Setting Thermostat Time and Date

Steps to set the current time and date on the thermostat.

System and Fan Operation Modes

Configuring System Modes

How to select and configure system modes like Auto, Heat, Cool, and Off.

Configuring Fan Modes

How to select and configure fan modes like Auto, On, and Circ.

Managing Alerts and Reminders

How to view, snooze, or clear alerts and reminders displayed on the thermostat.

Installer Setup (ISU) Overview

Advanced ISU Setup Options

Detailed list and descriptions of advanced installer setup parameters available for the thermostat.

Performing an Installer System Test

Product Specifications

Troubleshooting Common Issues

Safety Precautions and Customer Support

Safety Cautions and Warnings

Important safety warnings regarding electrical hazards, equipment damage, and mercury disposal.

Customer Assistance and Contact

Information on how to get help, including website and customer care phone number.