Need help?Do you have a question about the Honeywell Home T5 Smart and is the answer not in the manual?
General| Scheduling | 7-day programmable, flexible scheduling options |
|---|---|
| Geofencing | Yes |
| Remote Control | Yes, via Honeywell Home app |
| Warranty | 1-year limited warranty |
| Compatibility | Works with most 24V HVAC systems |
| Connectivity | Wi-Fi (2.4 GHz) |
| Control | Touchscreen |
| Voice Assistants | Amazon Alexa, Google Assistant |
| Display | Touchscreen |
| Power Source | C-wire required |
| Features | Smart alerts, adaptive intelligent recovery |
| Operating Modes | Heat, Cool, Auto, Off |
| Energy Saving | Energy Star certified, Adaptive Recovery, Usage Reports |
Lists optional tools that might be necessary for installation.
Essential safety instruction to disconnect power before proceeding with removal.
Confirms the heating/cooling system is powered down before removal.
Instructions on physically detaching the old thermostat from its mounting.
Crucial check to ensure no 120/240V wires are present for compatibility.
Recommends documenting current wiring for reference during new installation.
Guides on identifying and removing any existing jumpers from terminals.
Instructs to note down wire presence in specific terminals.
Details how to record wire colors connected to terminals for reference.
Describes detaching wires and removing the old wall plate.
Guides on preparing and inserting wires into the Universal Wall Plate (UWP).
Instructions for correctly installing wall anchors for mounting the thermostat.
Details setting the R-switch and connecting the R-wire(s) to terminals.
Instructions for connecting the remaining wires to the UWP terminals.
Guides on securing the UWP to the wall and closing its access door.
Describes how to connect the thermostat unit to the mounted UWP.
Instructs to restore power to the heating/cooling system.
Guides on returning to the thermostat to check for startup messages.
Begins the setup process by interacting with the thermostat's display.
Guides the user to choose app-based setup on the thermostat screen.
Outlines the process of downloading and using the Resideo app for setup.
Begins the manual setup process directly on the thermostat.
Guides the user to select manual setup instead of app setup.
Explains how to browse and modify settings manually on the thermostat.
Finalizes the manual configuration process on the thermostat.
Details manual steps for connecting to Wi-Fi if app setup fails.
Instructs on manually setting the date, time, and daylight saving.
To Next Page