Honeywell Home T6 Pro Z-Wave User Manual (English)

Questions and Answers:

J
Jason PowersJul 30, 2025
What to do if Honeywell Home T6 Pro Z-Wave heating or cooling system does not respond?
- L
  Leah RamirezJul 30, 2025
  If your Honeywell Home Thermostat's heating or cooling system isn't responding, try these steps: * First, set the system to Heat by touching Mode, ensuring the temperature is higher than the inside temperature. * Alternatively, set the system to Cool by touching Mode, making sure the temperature is lower than the inside temperature. * Check the circuit breaker and reset it if needed. * Confirm that the power switch at the heating & cooling system is on. * Ensure the furnace door is securely closed.
J
Justin ShieldsAug 8, 2025
How to fix a blank screen on Honeywell Home T6 Pro Z-Wave Thermostat?
- B
  Brian BarronAug 8, 2025
  If the screen on your Honeywell Home Thermostat is blank, here are a few things you can check: * Check the circuit breaker and reset it if necessary. * Make sure the power switch at your heating and cooling system is turned on. * Ensure that the furnace door is closed securely. * If your thermostat is battery powered, verify that the batteries are correctly inserted and are not dead.
K
Kathleen CortezAug 18, 2025
How to improve screen readability on Honeywell Home T6 Pro Z-Wave?
- S
  smithashleyAug 18, 2025
  To improve the readability of your Honeywell Home Thermostat screen, change the screen brightness in the thermostat Menu. You can increase the brightness intensity for the inactive backlight of the thermostat screen (the maximum level is 5). Note that this setting is only available if your thermostat is AC powered.