Honeywell Home T6 Pro User Manual

6
Batteries are optional (to provide backup
power) if your thermostat was wired to run on
AC power when installed. If your thermostat
was not wired to run on AC power, then
batteries are required.
Install fresh batteries immediately when the
low battery icon appears. The icon appears
about two months before the batteries are
depleted.
Even if the low battery icon does not appear,
you should replace batteries once a year, or
before leaving home for more than a month.
If batteries are inserted within two minutes, the
time and day will not have to be reset. All other
settings are permanently stored in memory,
and do not require battery power.
NOTE: When replacing batteries, alkaline
batteries are recommended.
Battery replacement
Insert fresh alkaline AA
batteries and reinstall
thermostat.
When the low battery
warning appears, carefully
pull the thermostat from
the wall mount.
Alerts
If there is an alert or reminder, the alert icon
appears on the Home screen.
Low Battery Warning
1 The batteries need to be replaced when
BATT, the alert icon
, and the battery icon
are displayed on the Home screen.
2 When the battery power is very low, the
thermostat’s backlight is disabled to save
battery power.
3 When battery power is critically low, only
BATT, the alert icon
, and the battery icon
are displayed.
Fan On
Heat
Home
Back

Honeywell Home T6 Pro Specifications

General

Model	T6 Pro
Temperature Control	Precise Temperature Control
Backlit	Yes
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Weight	0.5 lbs
Temperature Range	Heat: 40°F to 90°F, Cool: 50°F to 99°F
Warranty	1-Year Limited Warranty
Programmable	Yes
Power Source	Battery or Hardwired
Energy Saving	Yes
Stages	Up to 3 Heat/2 Cool
Smart Features	Remote control via app, Geofencing, Alerts
Dimensions	4.06 in. H x 4.06 in. W x 1.06 in. D
Change Reminders	Filter
Display	Touchscreen
Connectivity	Wi-Fi