Honeywell Home TH4110U2005 User Manual (English)

To Next Page

Package Includes:

• T4 Pro Thermostat

• UWP™ Mounting System

• Decorative Cover Plate

• Screws and Anchors

• 2 AA Batteries

• Thermostat Literature

T4 Pro

Programmable Thermostat

Product Data

TH4110U2005,

TH4210U2002

M37844

Optional Cover Plate installation

NOTE: If Optional Cover Plate is not

required, see “UWP Mounting System

installation” on next page.

Use the Optional Cover Plate when

you need to cover paint gap from old

thermostat.

There are different cover plates

depending on when the thermostat was

manufactured.

For the square cover plate:

1. Separate the Cover Plate from

Mounting Plate.

2. Mount the Mounting Plate on to the

wall using any of the 8 screw holes.

Insert and tighten mounting screws

supplied with Cover Plate Kit. Do not

overtighten. See Figure 2. Make sure

the Mounting Plate is level.

3. Attach the UWP by hanging it on the

top hook of the Mounting Plate and

then snapping the bottom of the UWP

in place. See Figure 3.

4. Snap the Cover Plate onto the

Mounting Plate. See Figure 4.

Use supplied

screws and

wall anchors

MCR38416

Model	TH4110U2005
Category	Thermostat
Display	Digital
Programmable	Yes
Stages	1 Heat/1 Cool
Compatibility	Conventional and Heat Pump systems
Backlight	Yes
Hold Feature	Yes
Filter Change Alert	Yes
Power Source	Battery or Hardwired
Temperature Range	40°F to 90°F
Voltage	20-30 VAC

Model

TH4110U2005