EasyManuals Logo

Honeywell Home TH4110U2005 User Guide

Honeywell Home TH4110U2005
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Package Includes:
T4 Pro Thermostat
UWP™ Mounting System
Decorative Cover Plate
Screws and Anchors
2 AA Batteries
Thermostat Literature
M37844
T4 Pro
Programmable Thermostat
TH4110U2005, TH4210U2002
User Guide
For assistance with this product, please visit Honeywellhome.com/support
Customer assistance
Thermostat controls
System status
information
Cool On/Heat On/Em
Heat On, Recovery,
Compressor Protection
Actual time
Schedule information
Following time based
schedule
Mode
Select system mode
Heat/Off/Cool/Auto/
EM Heat (emergency
heat)
Menu
Press to display options.
Start here to set a
program schedule
Indoor temperature
setpoint
Press + or – to change
temperature setting
Actual indoor
temperature
Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
Fan
Select Fan mode
Auto/On
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds
after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.
Read before installing

Other manuals for Honeywell Home TH4110U2005

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Home TH4110U2005 and is the answer not in the manual?

Honeywell Home TH4110U2005 Specifications

General IconGeneral
ModelTH4110U2005
CategoryThermostat
DisplayDigital
ProgrammableYes
Stages1 Heat/1 Cool
CompatibilityConventional and Heat Pump systems
BacklightYes
Hold FeatureYes
Filter Change AlertYes
Power SourceBattery or Hardwired
Temperature Range40°F to 90°F
Voltage20-30 VAC

Related product manuals