Honeywell 1114 User Manual

5
UNLOCKING AND OPENING THE CHEST
CLOSING AND LOCKING THE CHEST
WARNING: To avoid possible injury, make sure hands or fingers are clear
before closing the chest lid.
1. Press in on small black piece at bottom of latches (Figure 1).
2. Insert key into lock cylinder (Figure 2).
3. Turn the key clockwise to the right ¼ turn (Figure 3).
4. Chest is now unlocked and you may lift the lid (Figure 4).
Figure 1 Figure 4Figure 3Figure 2
WARNING:
To avoid possible injury, make
sure hands or fingers are clear
before closing the chest lid.
Figure 1 Figure 4Figure 3Figure 2
1. Carefully lower lid into the closed position (Figure 1).
2. Press top of latch flat against chest and hold (Figure 2).
3. While holding top of latch in place, Press on bottom of the latch
to lock into the closed position (Figure 3).
4. Turn the key counter clockwise to the left ¼ turn (Figure 4).
5. The chest is now locked and you may remove the key.

Honeywell 1114 Specifications

General

Brand	Honeywell
Model	1114
Category	Safes
Language	English