Honeywell 4800i User Manual

Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User’s Guide, available at our
website,
www.honeywellaidc.com.
1. Scan the Enter Data Format symbol.
2. Primary/Alternate Format: scan 0 for Primary Format
3. Terminal Type: scan 099 for any terminal type
4. Code I.D.: scan 99 for any bar code type
5. Length: scan 9999 for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan Save to save your entries.
Enter Data Format
Clear All Data Formats
Save

Honeywell 4800i Specifications

General

Dimensions (WxDxH)	81 x 135 x 163 mm
Wavelength	617 nm
Optical sensor resolution	752 pixels
Input voltage	5 V
Power consumption	382 mA
Certification	FCC Part 15, ICES-003, CE, C-Tick, EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3
Product color	Black, Orange
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	213 g