Honeywell 6160V - Ademco Talking Alpha Display Keypad User Manual

K0022UGV1 12/01 Rev. B
ADEMCO 6150V & 6160V
Voice Remote Keypad
USER GUIDE
This document provides Operating Instructions for your Keypad’s voice features. Refer to your
security system User Guide for all other security system functions and operating procedures.
Message Center
The ADEMCO 6150V/6160V Keypads feature a
voice message center that lets you record and
playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the Keypad’s memory
until a new message is recorded.
• The volume control of the message is adjustable.
• Refer to the procedures below when using the
Message Center functions.
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
ARMED
READY
6160V-00-005-V0
MESSAGE
MIC
RECORD
VOLUME
PLAY
STATUS
VOICE
FUNCTION
VOLUME
KEY
VOICE
KEY
STATUS
KEY
FUNCTION
KEY
DOWN
VOLUME
PLAY KEY
AND
UP VOLUME
RECORD
KEY
SPEAKER
LCD
DISPLAY
MICROPHONE
LEDs
To record a message:
Press [#] FUNCTION + [0] VOICE + [1] RECORD keys.
The red MESSAGE indicator will light, indicating record in progress.
Note
: A message cannot be recorded during the Exit Delay period.
To end recording:
Press [1] RECORD key.
The red MESSAGE LED will flash indicating a message waiting to be
played. After the message is played once the MESSAGE LED will go
out.
To play a message:
Press [#] FUNCTION + [0] VOICE + [3] PLAY keys.
The recorded message plays and the red MESSAGE LED turns off. The
recorded message will remain in memory until a new message is
recorded.
To adjust the volume:
Press [#] FUNCTION + [0] VOICE + [2] VOLUME keys,
then press the desired volume control key [3] ↑ (up) or [6] ↓ (down).
Note:
•
Adjusting message volume also adjusts status volume. Volume
cannot be adjusted while playing a message.
•
Each time you enter the command to adjust the volume, the word
“CHECK” will be heard to verify the current setting.
(Continued on Other Side)

Honeywell 6160V - Ademco Talking Alpha Display Keypad Specifications

General

Power Supply	12V DC
Mounting	Wall Mount
Operating Temperature	32°F to 120°F (0°C to 49°C)
Display Type	Alphanumeric
Compatibility	Ademco Security Systems
Voice	Yes
Zones	Supports up to 8 zones
Display	16-character alpha-numeric LCD
Backlighting	Yes
Wire Connection	4-wire

Summary

Message Center

Record Voice Message

Instructions for recording a voice message up to 2.5 minutes long.

End Voice Recording

Procedure to stop recording a voice message and indicate it is ready to play.

Play Voice Message

How to play back a recorded voice message stored in the keypad.

Adjust Message Volume

Steps to adjust the volume for voice messages and status announcements.

Chime and Status Features

Voice Chime Activation

Enables voice announcements for faulted zones when Chime mode is on.

Voice Status Announcements

Get system status and zone fault announcements when Voice Chime is active.

Announce System Status

Procedure to announce current system status and readiness to arm.

Announce Faulted Zones

Procedure to announce up to three faulted zones with descriptors or numbers.