EasyManua.ls Logo

Honeywell 6150RF - Ademco Deluxe Fixed Keypad/Receiver User Manual

Honeywell 6150RF - Ademco Deluxe Fixed Keypad/Receiver
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
K4461-1V1 4/05 Rev. A
ADEMCO 6150RF
Keypad/Transceiver
USER GUIDE
Keypad Features
DISPLAY
The keypad features a 2-digit numeric display for zone identification and pre-designated English-
language prompts (e.g., “ALARM,” “AWAY,” “STAY,” “CHECK,” etc.) for indicating system status. See
Figure 1.
FUNCTION KEYS
The function keys are located behind a decorative door and are continuously backlit for ease in use.
(Check the User’s Guide that accompanies the control panel for detailed instructions on the use of these
keys.)
The function keys include keys for panic alarm activation. The panic alarms are activated by pressing
key pairs [1] & [*], [3] & [#], or [*] & [#], or a Special Function Key (see below). Whether these panic keys
function and the type of panic alarms they produce is determined by the control panel’s capability and
programming. (Check with your installer for the availability and type of alarm of these panic keys.)
SOUNDER
The sounder is a piezo-electric sounder that pulses for fire alarms and generates a two-tone sound for
burglary and audible panic alarms.
KEYPAD LEDS
The keypad contains two LEDs that indicate the status of the system as follows:
LED Function
Green Lights when the system is ready to arm (no zone faults are present).
Red Lights when the system is armed.
SPECIAL FUNCTION KEYS
These are four keys located to the left of the numeric keys (see Figure 1). The keys may be programmed
by your installer for panic alarms or other special functions such as macros (a frequently used series of
key entries). Function keys must be held down for at least 2 seconds to activate an alarm.
(Check with your installer for the programmed function of these keys.)
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
ARMED
READY
6150RF-00-001-V1
Figure 1: ADEMCO 6150RF Keypad/Transceiver with Front Door Removed
Question and Answer IconNeed help?

Do you have a question about the Honeywell 6150RF - Ademco Deluxe Fixed Keypad/Receiver and is the answer not in the manual?

Honeywell 6150RF - Ademco Deluxe Fixed Keypad/Receiver Specifications

General IconGeneral
TypeKeypad/Receiver
BrandHoneywell
Model6150RF
SeriesAdemco Deluxe
Wireless Frequency345 MHz
Wireless ReceiverYes
Keypad TypeFixed
DisplayLCD
BacklightYes
WirelessYes
Power12VDC
MountingWall Mount
Weight0.5 lbs
CompatibilityHoneywell Alarm Systems

Summary

Keypad Features Overview

Keypad Display Functionality

Describes the keypad's 2-digit numeric display for system status and prompts.

Function Keys Operation

Details the backlit function keys, including their use for panic alarm activation.

Keypad Sounder Functionality

Explains the piezo-electric sounder and its different alarm sound patterns.

Keypad LED Status Indicators

Outlines the function of the two LEDs indicating system readiness and armed status.

Special Function Key Programming

Describes four programmable keys for panic alarms or custom macros.

User Mode for Wireless Key Management

Entering User Mode Procedure

Instructions on how to access the User Mode by pressing specific keys simultaneously.

Changing Transmitter Status

Steps to change the enabled/disabled status of individual wireless transmitters.

Exiting User Mode

Procedure to exit the User Mode by pressing the asterisk key.

Related product manuals