7
1. Scan the Host Reconnect Mode bar code, below.
2. Set your host device so it searches for other Bluetooth
devices. (Refer to your host device’s User’s Guide for pairing
instructions.)
3. Once your host device has located the scanner, select the
8690i scanner name from the list displayed.
Note: Refer to the 8690i User’s Guide if your host device displays
a PIN.
The Bluetooth symbol appears in the scanner window when the
scanner pairs with a host.
Pair with a PC or Laptop Bluetooth Serial Port: Scanner
Reconnect Mode
In this mode, the scanner will continually attempt to connect
with the host. If the scanner and the host become disconnected,
the scanner will manage the reconnection.
To Next Page
Loading...
Need help?
General