What to do if the Status LED lights red during charging my Honeywell PDA?
If the Status LED on your Honeywell PDA charger lights red during charging, attempt to charge the battery in an alternative charging slot. If the red light persists with the battery pack, the issue lies with the battery itself. However, if the red light remains with the charging slot, the problem is within the charging circuitry.
Why the Status LED does not come on when I insert a battery pack in my Honeywell PDA?
If the Status LED on your Honeywell PDA does not illuminate when you insert a battery pack, verify the power connections. Ensure that the power cable is correctly inserted into the power supply connector and that the battery pack is properly seated.
General| Memory | 128 MB RAM |
|---|---|
| Flash ROM | 256 MB |
| Operating System | Microsoft Windows Mobile 6.1 |
| Wireless Connectivity | Wi-Fi, Bluetooth |
| Scanning | 1D/2D imager or laser scanner |
| Expansion Slot | SDIO slot |
| Camera | Optional camera |
| Durability | Withstands 1.5 m (5 ft) drops to concrete |
| Connectivity | USB, RS-232 |
To Next Page
