How to fix Status LED if it does not come on when I insert a battery pack in Honeywell Dolphin 99EX?
If the Status LED doesn't turn on when you insert a battery pack into your Honeywell PDA, verify the power connections. Ensure the power cable is properly connected to the power supply connector and that the battery pack is correctly seated.
Why does the Status LED light red during charging on my Honeywell PDA?
If the red Status LED illuminates during charging of your Honeywell PDA, it could indicate an issue with the battery pack or the charging circuitry. You can try charging the battery in another charging slot to determine the source of the problem.
What to do if the Status LED flashes red without a battery in the charging slot for Honeywell Dolphin 99EX?
If the Status LED flashes red on your Honeywell PDA charger without a battery, it means the slot hasn't reset after a battery was removed in failure mode. To fix this, insert a working battery into the slot, or power cycle the QuadCharger.
Why does the Honeywell Dolphin 99EX status LED light red during charging?
The red status LED during charging could indicate a problem with the battery pack or the charging circuitry. You can try charging the battery in another slot to see if the issue persists. If the red status remains with the charging slot, the problem lies with the charging circuitry. If the red status appears again, the issue is with the battery pack.
How to fix a Honeywell Dolphin 99EX PDA when the status LED doesn't turn on after inserting the battery?
If the status LED doesn't come on when you insert a battery pack, check the power connections to ensure the power cable is properly inserted into the power supply connector and that the battery pack is correctly seated.
General| Display diagonal | 3.5 \ |
|---|---|
| Display resolution | 480 x 640 pixels |
| Display number of colors | - |
| Flash memory | 1 GB |
| Internal memory | 0.256 GB |
| Internal memory type | RAM |
| Compatible memory cards | microSDHC |
| Processor family | Instruments OMAP |
| Built-in processor | 3715 |
| Processor frequency | 1 GHz |
| Processor manufacturer | Texas Instruments |
| Operating system installed | Windows Embedded Handheld 6.5 Professional |
| Data network | GSM |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Bluetooth version | 2.1+EDR |
| Security algorithms | 802.1x RADIUS, CCX v4, EAP, EAP-TLS, EAP-TTLS, PEAP, WAPI, WPA, WPA2 |
| Rear camera resolution (numeric) | 3.1 MP |
| Headphone outputs | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Storage temperature (T-T) | -20 - 50 °C |
| Operating temperature (T-T) | -25 - 70 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Battery capacity | - mAh |
| Battery life (max) | 15.5 h |
| RFID reader | No |
| Product color | Black, Grey |
| Harmonized System (HS) code | 84713000 |
Weight and Dimensions| Depth | 215 mm |
|---|---|
| Width | 69 mm |
| Height | 39 mm |
| Weight | 505 g |
Safety information regarding laser aimer and potential hazards.
Procedures for initial setup, battery installation, charging, and power-up.
Connecting cables, booting the terminal, and setting time/date.
Details on various hardware configurations available for the 99EX model.
Identification and description of back panel components and features.
Information on battery types, charging, management, and error notifications.
List of 1D, 2D, Composite, OCR, and Postal bar code types supported.
Explanation of key types and their basic operations.
Customizing buttons and personalizing device functions.
Setting up and managing network connections, including ISP and work network.
Enabling and disabling on-board radios and accessing configuration utilities.
Synchronizing data with a PC using ActiveSync or WMDC.
Introduction to WWAN, GSM, HSPA+, UMTS, GPRS, EDGE, and necessary requirements.
Procedures for installing and requirements for a SIM card.
Establishing data communication via GSM/HSPA+ networks.
Managing radio status, network setup, and data sessions for GSM/CDMA models.
Steps to enable the Bluetooth radio for wireless communication.
Performing device discovery, pairing, and establishing connections.
Details on charging times and the intelligent battery charging system.
Connecting the terminal to the eBase via Ethernet.
Connecting the terminal to the eBase via USB.
Details on charging capabilities and supported communication types.
Description of front panel components including terminal wells and LEDs.
Connecting the terminal to a workstation via RS232 or USB.
Steps to connect terminals to the Net Base via Ethernet.
Details on charging times and the intelligent battery charging system.
Description of front panel, LEDs, power connection, and communication.
Steps to connect terminals to the Charge/Net Rack.
Contact information for obtaining product service and repair worldwide.
Contact details for installation or troubleshooting assistance.
Details of the product warranty, coverage, and limitations.
To Next Page
