7 - 12
Five Volt Control
Five Volt Control gives you the option to enable 5V output.
Note: Do not leave the USB Host enabled at all times.
HISS
The Honeywell Integrated Smart Sensor (HISS) configuration utility enables you to configure the Dol-
phin’s integrated accelerometer, light, and proximity sensors.
Tap > Settings > System > HISS.
Motion Settings
Motion Settings enable you to customize how the terminal responds to motion and object proximity for advanced
power management.
Display Settings enables or disables Auto Display
Orientation. When enabled, the Dolphin's display
automatically switches between portrait and landscape
depending on how you hold the terminal.
Power Management Settings customize how the terminal
responds to object proximity and motion.
• Save power by turning off the display or suspending the
terminal when it is placed face down.
• Modify the Motion Detection settings to wake the terminal
from suspend mode or prevent the terminal from entering
suspend mode when motion is detected.
To Next Page
Loading...
