Honeywell Dolphin 99EX - Checking Battery Power; Resetting the Terminal; Soft Reset (Warm Boot)

Preliminary
Draft 1/19/11
3 - 16
Setting Critical and Low Battery Points
Developers can reset the battery parameters in the registry from 0 (no warning) to 99 (would nearly
always warn). You can review and set these battery points in the RegEdit Power Tool.
1. Tap > Power Tools > RegEdit.
2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power.
3. Tap the Value Name to change the Value Data.
You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn).
4. Tap OK to save changes.
For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools User’s Guide avail-
able for download at www.honeywellaidc.com.
Checking Battery Power
Tap > Settings > System > Power.
For more information, see Power on page 7-16.
Note: Tapping the battery icon at the top of the screen does not open the Power applet with this version of Microsoft
Windows Embedded Handheld.
Resetting the Terminal
There are three types of system resets: a soft reset, a hard reset and a factory reset. The soft and hard
resets preserve all data stored in the file system. See Honeywell support for more information on how to
perform a factory reset.
Soft Reset (Warm Boot)
A soft reset re-boots the device and preserves any objects created in RAM. You would perform a soft
reset when:
• the terminal fails to respond.