Honeywell Dolphin 99EX - Parts and Functions; Front Panel

Preliminary
Draft 1/19/11
16 - 2
Parts and Functions
Front Panel
Terminal Wells
Power/Dock LED
COMM LED
Terminal Wells
The Net Base contains four terminal wells. Each well has its own dedicated Power/Dock LED
and COMM LED indicator.
Place the Dolphin terminal in any one of the four wells to communicate with a host device,
power the terminal, and charge the installed battery pack. The Net Base completely charges
the main battery in a Dolphin terminal in 4.5 hours for the standard 3.7V battery or 6 hours for
the extended 3.7 battery.
Power/DOCK LED
Indicates if power is supplied to the Net Base and if a terminal is docked properly in the terminal
well. Each terminal well has its own dedicated Dock LED.
This color means…
Red The Net Base has power but no terminal is docked.
Green The Net Base has power and the terminal is properly seated in the base.
COMM LED
The COMM LED indicates the status of connection and data transfer between the Dolphin
terminal and the Ethernet. Each terminal well has its own dedicated COMM LED.
When the Dolphin terminal is docked:
This color and status means…
Green
Solid
A
connection
has
been
esta
b
lished
bet
w
een
the
Dolphin
te
r
minal
and the Ethernet.
Green Flashing Data transfer in progress.