Honeywell Dolphin 99EX - Menu; Options; Recording Video

Preliminary
Draft 1/19/11
5 - 3
EN
T
Menu
Tap Menu on the Command Bar to adjust the camera settings, switch to video mode, and access addi-
tional camera options.
Item Descriptions
Video Activate Video Mode
Mode Normal Mode, Burst Mode, Timer Mode
Resolution Set picture resolution (i.e., 320 x 240, 640 x 480, 800 x 600, 1600 x 1200)
Zoom Set zoom (i.e., x1, x2, x3, and x4)
Flash Camera Flash On or Camera Flash Off
Focus Focus On, Focus Off, Focus on Trigger, or Fixed-Focus
Brightness Set the brightness setting from +2.0 EV to -2.0 EV in .5 EV increments
Full Screen Switch to full screen mode
Options Set General, Slide Show, Camera, and Video options
Focus Manual focus adjustment
Options
Tap Menu > Options. The Options menu contains four screens:
General Tab Slide Show Tab Camera Tab Video Tab
Recording Video
1. Tap > Pictures & Videos > Camera > Menu > Video
2. Point the terminal's camera lens at the object you want to capture.
3. Press the ENT key to start recording.
4. Tap Stop or press ENT to stop recording.