2 - 2
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
!
peripherals, cables, or power adapters may cause damage not covered by the warranty.
Before Initial Use
Terminals are shipped with both batteries discharged of all power. The initial charging time for the main
battery pack is 4.5 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Connect
the terminal to one of the 99EX series charging peripherals to charge; see Peripherals for the 99EX on
p
age 3-2. Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use
to ensure the internal backup battery is fully charged.
Using the Charging/Communication Cables
Dolphin
99EX
Plug
Adapter
Dolphin 99EX
Cable
Cup
Plug
Adapter
Host
Device
Power
Cable
Charging
Cup
Power
Cable
Client Device
COMM Cable
USB Connector
Or
RS232 Connector
Or
RS232, DEX A/V Connector
Step 3. Boot the Terminal
The terminal begins booting as soon as power is applied. Do NOT press any keys or interrupt the boot
process. When the boot process is complete, the Home screen appears, and the terminal is ready for
use.
Note: The Home screen appears several times during the boot process. To ensure the boot process is complete,
wait several seconds before using the device.
To Next Page
Loading...
