14 - 2
Front Panel
Terminal Lock
(not in view)
Terminal Well
Terminal Lock
Volume Control Dial
(not in view)
Ball Joint
for Mounting
Bracket
Status LED
Speaker
USB
Communications
Port
Mounting Bracket
Used to mount the base to a fixed location.
Speaker
Amplifies the Dolphin’s audio signals.
Status LED
Illuminates solid green when the Dolphin terminal is properly seated in the terminal well.
Terminal Locks
The mobile base has a locking switch on the left and right side. Pushing one of the switches
up locks the terminal in the base. To unlock the terminal push either switch down.
Terminal Well
Place the terminal in this well. Once seated, the terminal can communicate with a host device
and its main battery pack begins charging.
USB Communications Port
This USB Port is host high-speed 2.0v compliant. You can connect the base to a peripheral
device, such as a memory stick or to a printer using a USB cable. When the terminal is seated
in the terminal well, it is connected to the peripheral device via the base.
Volume Control Dial
The speaker volume is adjusted via the dial located on the side of the base.
To Next Page
Loading...
