10 - 6
Connecting to Bluetooth Printers
1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices.
2. Look up the Bluetooth printer’s broadcasted ID.
3. Perform a device discovery (Tap Settings > Bluetooth > Add new device.)
4. Look for the Bluetooth printer’s broadcasted ID in the list of discovered devices.
5. Click on the Bluetooth printer’s ID and wait for the prompt to enter a Passcode.
6. Enter the Passcode and tap Next.
The passcode may default to either "1111" or "0000." If there is no default, consult the printer
literature for the number.
7. Select a printing-related service in the list of services.
8. Tap Save to establish the connection on the terminal.
9. Complete any additional steps required by the printer.
Connecting to Bluetooth Headsets
1. Make sure the Bluetooth headset is in range and set to be discoverable by other Bluetooth devices.
2. Look up the headset’s broadcasted ID.
3. Perform a device discovery (Tap Settings > Bluetooth > Add new device.)
4. Look for the headset’s broadcasted ID in the list of discovered devices.
5. Click on the headset’s ID and wait for prompt to enter a passcode.
6. Enter the Passcode and tap Next.
The passcode may default to either "1111" or "0000." If there is no default, consult the headset
literature for the number.
7. Select Headset in the list of services.
8. Tap Save to establish the connection on the terminal.
9. Complete any additional steps required by the headset.
To Next Page
Loading...
