Honeywell Dolphin 99EX - Parts and Functions; Front Panel

Preliminary
Draft 1/19/11
13 - 2
Parts and Functions
Front Panel
Terminal Well
Auxiliary Battery Well
Power/Dock LED
COMM LED
AUX Battery LED
Terminal Well
Place the terminal in this well to communicate with a host device, power the terminal, and
charge the installed battery pack. The eBase completely charges the main battery in a Dolphin
terminal in 4.5 hours for the standard 3.7V battery or 6 hours for the extended 3.7 battery.
Auxiliary Battery Well
See Auxiliary Battery Well on page 13-4.
Power/DOCK LED
Indicates if power is supplied to the eBase and if a terminal is docked properly in the base.
This color means…
Red The eBase has power but no terminal is docked.
Green The eBase has power and the terminal is properly seated in the base.
AUX Battery LED
The AUX Battery LED indicates the status of the battery charging in the auxiliary battery well;
see Back Panel on page 13-4.
This color means…
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.