Need help?Do you have a question about the Honeywell 8732301 and is the answer not in the manual?
Marking and drilling door face and edge holes according to template guides.
Marking and drilling the door jamb for strike plate installation and chiseling for flush fit.
Steps for installing the latch into the door, ensuring a flush fit and proper screw tightening.
Attaching the exterior part of the lock to the door, including gasket and wiring.
Fastening the mounting plate and exterior assembly securely to the door.
Mounting the interior assembly to the mounting plate using screws.
Inserting batteries and covering them, with initial power-up indicators.
Verifying the lock's functionality with the interior knob and keypad after installation.
Instructions on how to lock and unlock the door using the keypad.
To Next Page
General
