– 30 –
USER FUNCTIONS
Clock/Calendar
5. The system will announce, “Enter two-digit day press ADD to accept, ESCAPE to quit”.
Day 01 (The current day of the month will display.)
Enter the 2-digit day of the month (i.e., 01-31).
Press [ADD] to accept the entry and continue to the year setting.
Press [ESCAPE] to back up to Month selection.
6. The system will announce, “Enter two-digit year press ADD to accept, ESCAPE to quit”.
Year 05
(The current year will be displayed.)
Enter the last two digits of the year (i.e., 00-99).
Press [ADD] to accept the entry and exit Clock-Setting mode (keypad beeps 4 times).
Press [ESCAPE] to back up to Day selection.
To Next Page
Loading...
