Need help?Do you have a question about the Honeywell ADEMCO VISTA-15PSIA and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | ADEMCO VISTA-15PSIA |
| Category | Security System |
| Language | English |
Guidelines for placing smoke/heat detectors per NFPA for optimal early warning.
Recommendations for sensor placement to ensure comprehensive intrusion coverage.
Overview of the features and functions supported by the ADEMCO VISTA-20P and VISTA-15P systems.
Key installation points and lists of compatible devices for the ADEMCO VISTA-20P/15P systems.
Instructions for mounting the control cabinet and securing the PC board inside.
Procedures for connecting AC power, battery, and earth ground to the control panel.
Instructions for connecting sounders, keypads, and other addressable devices.
How to wire and configure hardwire zones and expansion modules.
Steps for installing RF receivers and configuring wireless transmitter zones.
Procedures for installing keyswitches, relay modules, and powerline carrier devices.
Connecting phone lines, phone modules, and Audio Alarm Verification (AAV) units.
General information on system programming methods, modes, and interface interaction.
Explains how different zone types define system response to faults.
Configuration options for system setup, zone timing, and dialer parameters.
Explains report codes, miscellaneous fields, and pager configuration options.
Defines custom zone types using various options for response and reporting.
Settings for Touch Screen (AUI) and standard keypad addresses, partitions, and sound options.
How to program zone attributes, assign partitions, and use expert mode for programming.
How to map output devices and define their functions based on system events.
How to group zones into lists and program keypad function keys for system operations.
How to assign zone descriptors, custom words, and program installer/user schedules.
How the panel communicates with the central station and explains report code formats.
Details on Contact ID reporting, event codes, and system security code authority levels.
Lists system commands, keypad functions, voice keypad features, and summarizes arming modes.
Explains system trouble messages, panic keys, and real-time clock settings.
Overview of tests including system, dialer, and transmitter enrollment checks.
Test to verify RF signal strength and dialer communication, plus periodic test reports.
Physical and electrical specifications for the security control panel.
Lists compatible keypads, wireless receivers, zone expansion modules, etc.
Table detailing 5800 Series transmitters, their input types, and descriptions.
FCC and Industry Canada statements regarding RF emissions and telephone line interface.
Specific notes and requirements for SIA installations, referencing UL standards.
Critical warnings about alarm system limitations and potential failure points.
Details Honeywell's limited warranty terms and conditions for the product.
To Next Page