Need help?Do you have a question about the Honeywell Ademco Vista-48LA and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Ademco Vista-48LA |
| Category | Security System |
| Language | English |
Details system capabilities including partitions, common area option, zone support, and download methods.
Describes key system functions like single-button arming, schedules, macros, and event logging.
Lists supported keypads, receivers, transmitters, and expansion modules for the system.
Provides critical notes for installers regarding keypads, zone expanders, and system power-up.
Instructions for mounting the control cabinet and installing its lock mechanism.
Procedure for mounting the main circuit board within the cabinet.
Steps for installing the PC board along with the RF receiver module.
Guide for connecting keypads to the control, including address setting and programming.
Details on connecting sounders (sirens) to the alarm output terminals.
Instructions for installing and connecting the 12VDC backup battery.
Guidance on wiring normally open, normally closed, and EOLR zones.
Wiring instructions for 2-wire and 4-wire smoke detectors.
Procedure for connecting and assigning addresses to zone expander modules.
Steps for installing the RF receiver, including placement and connection.
Instructions for wiring relay modules, including address assignment.
Guide for connecting the incoming phone line to the system.
Introduction to the system's programming modes and methods.
Explains how zones are assigned to partitions for system protection.
Details on keypad addresses, enabling, and related programming fields.
Procedure for programming the system to send reports to pagers.
Defines various zone types and how the system responds to zone faults.
Explains the procedures for data field and interactive mode programming.
Introduction to the numerical data fields used for system configuration.
Details critical system setup parameters like installer code and RF options.
Configuration of phone numbers, account numbers, and dialer delay settings.
Defines codes for system events like exit errors, troubles, and bypasses.
Explains zone programming using standard and expert modes.
Guides on programming wireless keys using predefined templates.
Maps output numbers to device addresses for relays and X-10 devices.
Defines automated control functions for output devices based on events.
Explains how to create zone lists for system actions.
Guides on assigning functions to keypad programmable keys.
Allows customization of zone types for specific responses.
Sets up schedules for system events and user access control.
Details how the system communicates alarm and status information to the central station.
Describes supported communication formats like Ademco Contact ID and Robofon 8.
Explains user authority levels and how to assign security codes.
Lists and describes common keypad commands and functions.
Allows users to receive alarm alerts via phone calls.
Procedure for verifying all system components and zones are operational.
Verifies the system's ability to communicate with the central station.
Explains the system's automatic battery monitoring and testing functions.
Lists compatible keypads, receivers, zone expanders, and other accessories.
Important warnings about system limitations and user responsibilities.
To Next Page
