Need help?Do you have a question about the Honeywell ADEMCO VISTA-40 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | ADEMCO VISTA-40 |
| Category | Security System |
| Language | English |
Describes the system components, purpose, and protection types.
Describes the system's fire alarm function, compliance, and temporal pulse sounding.
Explains the four burglary arming modes and zone bypassing.
Disarms system, silences alarms, and clears troubles.
Arms perimeter and interior protection with entry delay.
Arms perimeter protection, allows interior movement.
Arms all protection, eliminates entry delay.
Perimeter arming with no entry delay.
Explains system exit and entry delay periods.
Assigned codes, authority levels, and user numbers.
Details on 6 user authority levels.
Step-by-step guide for adding users.
Procedure to modify user access codes.
Procedure to remove user access.
Verifies if all zones are closed or bypassed.
Manually unprotects specific zones.
Arms perimeter, allows interior movement with delay.
Arms perimeter instantly, no entry delay.
Arms all zones, allows exit delay.
Arms all zones, no entry delay.
Procedure to disarm the system and silence alarms.
How to manually trigger panic alarms.
Steps to view system event history.
How to put the system into test mode.
Steps to test all system sensors and points.
Procedures for responding to a fire emergency.
How to silence active fire alarms.
Common system trouble messages and their causes.
Actions to take during power interruptions.
Recommended steps for creating and practicing escape plans.
How to replace batteries in wireless sensors.
To Next Page
