Need help?Do you have a question about the Honeywell Ademco VISTA-20P and is the answer not in the manual?
General| Hardwired Zones | 9 |
|---|---|
| Partitions | 2 |
| User Codes | 48 |
| Power Supply | 16.5VAC, 25VA |
| Keypads | Supports up to 8 keypads |
| Communication | Phone line, optional GSM or IP module |
| Backup Battery | 12VDC, 7AH |
| Zones | Up to 48 zones |
| Wireless Zones | Up to 39 (when expanded) |
Details the methods for accessing the system's programming interface.
Lists the commands used to navigate and execute programming tasks within the system.
Provides a mapping of device types to their assigned module addresses.
Configuration for installer code, arming, delays, and sounder timeouts.
Setup for audible exit warnings, power-up states, and central station reporting.
Manages split/dual reporting, burglary dialer delays, and SESCOA/Radionics selection.
Configures dynamic signaling, system status, bypass, trouble, and cancel report codes.
Manages keypad addresses, display options, and ECP fail display settings.
Defines custom zone types, including response, report codes, and zone doubling.
Step-by-step guide for programming individual zones, including type and serial numbers.
Assigns specific functions to programmable keypad keys for quick access.
Maps output devices and defines their activation events and actions.
Programs custom zone descriptors and sets up system schedules for automation.
Worksheet for recording programmed schedules, including event type, times, and repeat options.
Worksheet for documenting zone programming details such as type, partition, and response time.
To Next Page
