P a g e | 4
How to arm and disarm your system
Using your Keypads
Disarm: To disarm your system enter your code + Off (1) Example 1234+1
Arm Away: To Fully arm your system to away enter your code + Away (3) example 1234+3
Arm Stay: To arm your system to Stay mode enter your code + Stay (2) example 1234+2
Arm Instant: To Arm your system to Instantly go off as soon as a door opens instead of having a
Entry Delay enter your code + 7. (Note this will only arm in Stay mode)
Using your remotes
Disarm: Press the OFF button
Arm Away: Press the ON button (it could say away)
Arm Stay: Press the Stay button
Adding/Deleting Master and User Codes
Changing your master code
To change your master code you need to enter your current code + 802 + the new code TWICE.
(Example if your code is 1234 and you wanted to change it to 5555 you would press:
1234+802+5555+5555)
User codes:
To change a user code enter your Master code+8+03 (codes can be from 03-32 depending on how
many codes are needed) + new code
Delete user codes:
Master code+8+03 (or desired code to delete) + (#) + 0
To Previous Page
Loading...
