Honeywell BENDIX/KING KCS55A - Section 2 Installation

BENDIX/KING KCS 55/55A
Page ii
©Honeywell International Inc. Do not print without express permission of Honeywell Rev 11, Apr/2007
PARAGRAPH
PAGE
2.4 KG 102/102A GYRO INSTALLATION 2-3
2.4.1 GENERAL 2-3
2.4.2 MOUNTING 2-3
2.5 KMT 112 TRANSMITTER INSTALLATION 2-3
2.5.1 GENERAL 2-3
2.5.2 MOUNTING 2-3
2.6 KA 51/51A/51B SLAVING ACCESSORY INSTALLATION 2-3
2.6.1 GENERAL 2-3
2.6.2 MOUNTING 2-3
2.7 ADAPTER INSTALLATION 2-4
2.7.1 KA 52 ADAPTER 2-4
2.7.2 MOUNTING 2-4
2.7.3 KA 57 ADAPTER 2-4
2.7.4 MOUNTING 2-4
2.8 ADJUSTMENTS 2-4
2.8.1 KI 525/525A 2-4
2.8.2 KG 102/102A 2-4
2.8.3 KMT 112 2-4
2.8.4 KA 51/51A 2-4
2.8.5 KA 51B 2-5
2.8.6 ALTERNATE METHOD OF COMPENSATION ADJUSTMENTS
FOR KMT 112 AND KA 51/KA 51A 2-6
2.8.7 KA 52 and KA 57 2-7
2.9 AVAILABILITY OF 400 HZ. POWER FROM THE KG 102/102A 2-9
SECTION III
OPERATION
PARAGRAPH PAGE
3.1 DISPLAY DESCRIPTION 3-1
3.1.1 KI 525/525A INDICATOR AND CONTROLS 3-1
3.2 OPERATING PROCEDURES 3-2
3.3 EMERGENCY OPERATION 3-3
RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION
UP536434