Need help?Do you have a question about the Honeywell Bendix/King KX 165A and is the answer not in the manual?
General| Modulation | AM |
|---|---|
| Type | VHF Transceiver |
| Frequency Range | 118.000 - 136.975 MHz |
| Channel Spacing | 25 kHz |
| Power Output | 10 watts |
| Transmitter Power | 10 watts |
| Channels | 760 channels |
| Weight | 4.5 lbs |
| Operating Voltage | 14 VDC |
| Power Supply | 14 VDC |
Explanation of the KX 165A Navcom transceiver block diagram.
Detailed description of the COM receiver's front end, IF amplifier, synthesizer, and audio path.
Information on test equipment and procedures required for aligning and testing the KX 165A.
Procedures for unit level alignment, including adjustments via front panel and specific settings.
Test procedures for control functions and transmitter frequency error checks.
Test procedures for COMM receiver sensitivity, AGC characteristics, selectivity, and volume gain control.
Test procedures for transmitter power output, modulation capabilities, carrier noise level, and squelch.
Test procedures for VOR flag sensitivity, RF sensitivity, quieting, selectivity, and VOR indication.
Test procedures for LOC centering, deflection, alarm, and composite level.
Test procedures for glideslope receiver/converter sensitivity, selectivity, centering, deflection, and flag current.
To Next Page
