BENDIX/KING
KY 196B
VHF COMMUNICATIONS TRANSCEIVER
Page 1-2 10570I01.ZIPCDL
Rev 1 January/2000
TEMPERATURE RANGE:
-- 2 0 °Cto+55°C with short time
operation at +70°C
POWER REQUIREMENTS:
KY 196B: 28VDC at 0.4A (Receive)
6.5A (Transmit)
FREQUENCY RANGE: 118.000 MHz to 136.9916 MHz in
8.33 KHz mode.
118.000 MHz to 136.975 MHz in 25
KHz mode
FREQUENCY STABILITY: 0.0005% from --20°Cto+55°C
DESIGN: All solid state, Printed circuit board
and point to point wiring.
FCC ID: ASYKY196B
FCC EMISSION DESIGNATORS: 6K00A3E
6K00A9W
TRANSMITTER
POWER OUTPUT:
KY 196B: 16 Watts minimum
MODULATION: 70% modulation capability with 98% limiting.
Less than 15% distortion at 70% modulation.
SIDETONE OUTPUT: Adjustable up to 100mW into 500Ω headphones
MICROPHONE: Standard carbon dynamic mic containing
transistorized preamp. Must provide 100mVRMS
into 100Ω load.
HARMONIC CONTENT: Greater than 60dB down from carrier.
HIGH TEMPERATURE PROTECTION: If the transmitter or modulator circuits become hot
enough to potentially hurt any components in the
transceiver, a protection circuit will automatically turn
down the transmitter power consumption and output
power to 4 Watts minimum.
DUTY CYCLE: 1 minute on, 4 minutes off
To Next Page
Loading...
