INSTALLATION MANUAL
89000007
Page 4-8
15 Nov 2013
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 4-2. Fault Messages
Message Initial Action
FPGA fault Call BendixKing Customer Support
ROM checksum failed XXXX Call BendixKing Customer Support
Receiver fault or no signal Call BendixKing Customer Support
Transmitter failed Call BendixKing Customer Support
Squitter failure Call BendixKing Customer Support
I2C write data Call BendixKing Customer Support
BendixKing Customer Support:
• Telephone: 855-250-7027 (Toll Free U.S.A./Canada)
• Telephone: 602-365-7027 (International)
• Website: www.bendixking.com/support
• Email: techsupport@bendixking.com.
To Next Page
