Honeywell BK-G10M User Manual

➔ www.docuthek.com
D GB F NL I SK RUS E RORO SRBSRB SRBCZ P
© 2018 Elster GmbH · Edition 01.18
Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
▷ = Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Changes to edition 07.7
The following chapters have been changed:
– Checking the usage
– Commissioning
– Accessories
– Technical data
– Declarations of conformity
– ATEX legend
– Logistics
Contents
Operating instructions
D
GB
F
NL
I
SK
RUS
E
RO
SRB
GB-1
1000063767-002-20
Translation from the German
Safety
Contents
Diaphragm gas meters
BK-G.6 to BK-G5
Diaphragm gas meters
BK-G.6 to BK-G5 .....................
Contents ..............................
Safety.................................
Checking the usage .....................
Diaphragm gas meters BK-G1.6 to G25 ......2
BK with integrated “Smart Valve” ............2
Type code .............................2
Part designations ........................2
Type label/Index plate.....................2
ATEX identification .......................3
Installation ............................4
Temperature test point ..................5
Pressure test point on housing (optional) ...5
Connecting the piping ....................6
Pressure test point on outlet connector
(optional) ..............................6
Opening the test nipple ...................6
Closing the test nipple ....................6
Tightness test ..........................6
Commissioning.........................7
Maintenance/Removal...................8
Accessories ...........................8
Technical data .........................9
Declarations of conformity ..............0
ATEX legend ..........................14
Logistics .............................4
Contact ..............................4
03250886

Honeywell BK-G10M Specifications

General

Brand	Honeywell
Model	BK-G10M
Category	Measuring Instruments
Language	English

Summary

Safety Information

Safety Instructions and Indicators

Highlights danger, warning, and caution indicators for safety information.

Checking Gas Meter Usage

Operation in Potentially Explosive Atmospheres

ATEX Identification Details

BK-G..M, BK-G..C, BK-G..MT, BK-G..CT ATEX

BK-G..A, BK-G..AT ATEX

Index El2 Variants

Category 1 Devices

Category 3 Devices

Installation Procedures

General Installation Precautions

Important warnings regarding pressure, temperature, vibration, and environmental conditions.

Installation Requirements and Best Practices

Details regulations, bonding, protection, and avoiding mechanical stress during installation.

Piping and Tightness

Connecting the Piping

Ensures gas meter tightness by proper connection, using correct olives, and avoiding manipulation.

Piping Installation Guidelines

Guidance on using precision steel tubes, installing pipes without stress, and tightening union nuts.

Tightness Test Procedure

Procedure for checking pipework leaks before installation, considering test pressure and valves.

Commissioning and Interfaces

Final Tightness Checks

Procedure for venting the gas meter after testing and securing test points.

Commissioning Readiness

Confirms meter readiness for operation after successful tightness test.

Interface Options for Various Indexes

Integrated Valve Operation

Valve Functions and Maintenance

Smart Valve (Vs) Functionality

Maintenance and Removal Procedures

States meters are maintenance-free but require recalibration for custody transfer.

Handling After Meter Removal

Instructions for closing connectors with caps and avoiding dirt ingress after meter removal.

Safety During Maintenance and Cleaning

Warnings about residual gas, explosion risk, and cleaning methods for potentially explosive atmospheres.

Accessories and Technical Data

Recommended Pulse Transmitters (IN-Z6x Series)

General Technical Data for Diaphragm Gas Meter BK

Provides technical data for gas types, pressure, measuring range, and temperature limits.

BK with Explosion Protection Technical Data

Details parameters for Category 1 meters regarding ambient and gas temperatures.

BK-G..A/AT Interface Parameters

ATEX Declaration of Conformity

Conformity for BK-G..M, C, MT, CT with ATEX

RFID and ATEX Declaration

Conformity for BK-G..M, C, MT, CT with RFID and ATEX

MID and EMC Declaration

Conformity for BK-G..A, BK-G..AT

ATEX Legend and Logistics

ATEX Legend Definitions

Defines ATEX markings for explosion protection, atmosphere types, and temperature classes.