Honeywell BK-G4MT - User Manual

➔ www.docuthek.com
D GB F NL I SK RUS E RORO SRBSRB SRBCZ P
© 2018 Elster GmbH · Edition 01.18
Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
▷ = Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Changes to edition 07.7
The following chapters have been changed:
– Checking the usage
– Commissioning
– Accessories
– Technical data
– Declarations of conformity
– ATEX legend
– Logistics
Contents
Operating instructions
D
GB
F
NL
I
SK
RUS
E
RO
SRB
GB-1
1000063767-002-20
Translation from the German
Safety
Contents
Diaphragm gas meters
BK-G.6 to BK-G5
Diaphragm gas meters
BK-G.6 to BK-G5 .....................
Contents ..............................
Safety.................................
Checking the usage .....................
Diaphragm gas meters BK-G1.6 to G25 ......2
BK with integrated “Smart Valve” ............2
Type code .............................2
Part designations ........................2
Type label/Index plate.....................2
ATEX identification .......................3
Installation ............................4
Temperature test point ..................5
Pressure test point on housing (optional) ...5
Connecting the piping ....................6
Pressure test point on outlet connector
(optional) ..............................6
Opening the test nipple ...................6
Closing the test nipple ....................6
Tightness test ..........................6
Commissioning.........................7
Maintenance/Removal...................8
Accessories ...........................8
Technical data .........................9
Declarations of conformity ..............0
ATEX legend ..........................14
Logistics .............................4
Contact ..............................4
03250886

Summary

Safety

Safety instructions

Highlights information relevant for safety, including danger and warning indications.

Checking the Usage

Diaphragm gas meters BK-G1.6 to G25

Details on residential/commercial use and applicable standards for gas meters.

Potentially explosive atmosphere

ATEX Identification

BK-G..M, BK-G..C, BK-G..MT, BK-G..CT

ATEX identification details for specific meter types with RFID passive tag.

BK-G..A, BK-G..AT

ATEX identification details for specific meter types.

Installation

Installation conditions

Connecting the Piping

Tightness test

Procedure to check pipework and meter for leaks before operation.

Commissioning

Interfaces

BK-G..M with mechanical index

Connecting pulse transmitters for mechanical indexes.

BK-G..E, BK-G..ETB, BK-G..ETe(B), BK-G..B with electronic index

BK-G... with RFID passive tag

Safety note regarding RFID tag transmission capacity limits.

Diaphragm gas meters BK with integrated valve

Maintenance and Removal

General maintenance notes

WARNING

Safety precautions for gas meter removal, purging, and handling.

Technical Data

Diaphragm gas meter BK

General technical data on gas type, pressure, temperature, and volume.

Diaphragm gas meters BK with explosion protection

ATEX parameters for Category 1 devices regarding temperature limits.

Diaphragm gas meters BK with integrated Smart Valve Vs

Operating parameters, including opening/closing times for the Smart Valve.

Diaphragm gas meters BK with integrated valve Ve

Operating parameters for the integrated Ve valve.

Honeywell BK-G4MT Specifications

General

Brand	Honeywell
Model	BK-G4MT
Category	Measuring Instruments
Language	English