LYNX BACnet® Programmable
VAV/Unitary Controllers
Product Data
Copyright © 2015 Honeywell GmbH All Rights Reserved EN0Z-0959GE51 R0615
GENERAL
The BACnet MS/TP LYNX controllers are designed to control
HVAC equipment.
LYNX controllers provide many options and advanced system
features that allow state-of-the-art commercial building
control. Each LYNX controller is programmable and con-
figurable using the COACH
AX
software.
LYNX BACnet controllers require the LYNX BACnet Pro-
grammable Feature to be licensed in COACH
AX
.
LYNX controllers are designed for use in VAV (Variable Air
Volume) and Unitary HVAC control applications. Each con-
troller contains a host microcontroller to run the main HVAC
application and a second microcontroller for BACnet MS/TP
network communications. Each controller has flexible,
universal inputs for wall modules, digital inputs, and a mix of
analog and digital triac outputs (see Table 1). The models
CLLYVB6436AS, CLLYVB0000AS, and CLLYVB4022AS
include an actuator.
Table 1. Controller configurations
model type
Universal
Inputs (UI)
Digital
Inputs (DI)
nalog Out-
puts (AO)
Digital Out-
puts (DO)
velocity pressure
sensor (Microbridge)
floating
actuator
CLLYUB1012S unitary 1
0 1 2 NO NO
CLLYUB4024S unitary 4
0 2 4 NO NO
CLLYUB6438S unitary 6 4 3 8 NO NO
CLLYVB0000AS VAV 0 0 0 0 YES YES
CLLYVB4022AS VAV 4
0 2 2 YES YES
CLLYVB4024NS VAV 4
0 2 4 YES NO
CLLYVB6436AS VAV 6 4 3 6 YES YES
CLLYVB6438NS VAV 6 4 3 8 YES NO
One Universal Input (UI-1*) is selectable as a fast digital pulse meter.
All of the LYNX controllers communicate via an EIA-485 BACnet MS/TP communication network, capable of baud rates of
between 9.6 and 115.2 kbits/sec.
The LYNX controllers are field-mountable to either a panel or a DIN rail.
To Next Page
Need help?
General
