EasyManua.ls Logo

Honeywell CHRONOTHERM IV DELUXE T8624D User Manual

Honeywell CHRONOTHERM IV DELUXE T8624D
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
T8624D Chronotherm
®
IV Deluxe
Programmable Thermostat
PRODUCT DATA
® U.S. Registered Trademark
Copyright © 1997 Honeywell Inc. • All Rights Reserved
APPLICATION
The T8624D Chronotherm® IV Deluxe Programmable
Thermostat provides electronic control of 24 Vac multistage
heating and cooling systems.
FEATURES
Full seven-day program capability; different schedules
and temperature setpoints may be selected for
everyday to match the homeowner’s flexible schedule.
Copy key makes programming easier and faster for
the installer and homeowner.
Daylight Savings Time (DST) key for quick change in
and out of Daylight Savings Time.
Models available with programmable fan operation for
added homeowner comfort.
Easy temporary temperature setpoint changes for
current period, vacation hold (1 to 255 days) or
indefinite hold adds to the homeowner comfort and
energy savings.
Most frequently used keys are located by the Liquid
Crystal Display (LCD) for quick and easy access to
information.
Attractive styling complements any decor to the
homeowner’s delight.
Back lighting the large display makes the LCD very
easy to read.
Models available with outdoor temperature sensor
capability for homeowner convenience. The sensor is
also more accurate than a thermometer.
Configurable features allows one model to be used to
replace many different models (less inventory, no
longer need to carry separate models to get these
features).
°F or °C temperature display;
automatic or manual changeover;
electric or conventional heat fan operation;
adjustable heating cycle rate.
Minimum off time for cooling compressors and heat
pumps protects the equipment and extends the
equipment life.
Easy installation, setup and system test saves
installer time and increases productivity.
System test simplifies troubleshooting and saves time
by overriding the time delays.
Adaptive Intelligent Recovery® control brings the
room temperature to temperature setpoint at the
programmed time, maximizing comfort and energy
savings.
Setpoints are permanently held in memory (no
batteries used) and retained during power outages for
increased installer and homeowner convenience.
Universal Versaguard™ Thermostat guards available
for added security.
Contents
General ............................................................................... 1
Features .............................................................................. 1
Specifications ...................................................................... 2
Ordering Information ........................................................... 2
Installation ........................................................................... 3
Wiring .................................................................................. 4
Settings ............................................................................... 6
Installer Setup ..................................................................... 7
Installer System Test ........................................................... 10
Programming....................................................................... 12
Operation ............................................................................ 16
Troubleshooting Guide ........................................................ 18
Cross Reference ................................................................. 19
Wiring Diagram ................................................................... 20
68-0166-1

Questions and Answers:

Honeywell CHRONOTHERM IV DELUXE T8624D Specifications

General IconGeneral
Display TypeLCD
Temperature Range40°F to 90°F (4°C to 32°C)
Power Source24V AC
CompatibilityGas, oil, or electric heat with or without cooling
Frequency50/60 Hz
Stages1 Heat/1 Cool
Programmability7-Day Programmable
Programmable Periods4 Periods per Day
Filter Change AlertNo
Fan ControlAuto / On
TypeProgrammable
FeaturesProgrammable
Voltage24VAC
Operating ModesHeat, Cool, Off
Hold FeatureYes, Temporary and Permanent Hold
System SwitchHeat, Cool, Off

Summary

Product Data and Features

Outdoor Temperature Sensor Capability

Models offer optional outdoor sensor for enhanced convenience and accuracy.

Configurable Features

One model replaces many, reducing inventory and simplifying feature access.

Temperature Display Options

Supports °F or °C display, automatic/manual changeover, and heat/fan operation.

Minimum Equipment Off Time

Protects compressors and heat pumps by enforcing minimum off cycles.

Installer Efficiency Features

Streamlined installation, setup, and system testing saves installer time.

Adaptive Intelligent Recovery

Optimizes comfort and savings by proactively reaching setpoints.

Permanent Memory Retention

Setpoints are stored permanently, retaining data during power outages.

Seven-Day Programmable Scheduling

Allows flexible daily schedules and temperature setpoints for homeowner convenience.

Easy Programming with Copy Key

Simplifies programming by allowing quick copying of daily schedules.

Daylight Savings Time Key

Provides a quick method to adjust for Daylight Savings Time changes.

Programmable Fan Operation

Offers enhanced homeowner comfort through programmable fan control.

Temporary and Vacation Temperature Holds

Allows temporary setpoint adjustments for comfort and energy savings.

User-Friendly Key Layout

Frequently used keys are conveniently located near the LCD for easy access.

Attractive Design and Backlighting

Features stylish design and backlit display for easy readability in any light.

Specifications and Ordering

Temperature and Setpoint Ranges

Details operating ambient, shipping limits, display accuracy, and setpoint ranges.

Electrical and Relay Ratings

Specifies electrical ratings, system current load, and output relay capacities.

Operational Timing Parameters

Covers minimum stage operation times for heating and cooling.

Clock Accuracy and Humidity Ratings

Defines clock accuracy per month and acceptable humidity levels.

Ordering Information

Provides guidance on how to order replacement and modernization products.

Installation Procedures

Product Installation Guidelines

Instructions for careful installation to prevent product damage or hazardous conditions.

Optimal Thermostat Location

Recommends placement for good air circulation, avoiding drafts and direct heat/cold sources.

Wallplate Mounting Procedure

Step-by-step guide for securely mounting the wallplate to the wall or wiring box.

Mounting Thermostat Wallplate

Steps for physically attaching the thermostat unit to the installed wallplate.

Wiring

Settings and Configuration

Using Thermostat Keys

Explains the function of various keys for controlling the thermostat's operation.

System and Fan Setting Configurations

Guides on setting system mode (Heat, Cool, Auto) and fan operation (On, Auto).

Installer Setup

Setting Current Day and Time

Procedure for configuring the thermostat's internal clock and day.

Installer System Test

Thermostat Information Display

Accessing and interpreting production date, software ID, and revision numbers.

Programming

Adaptive Intelligent Recovery® Feature

Explains how the system proactively reaches comfort settings at programmed times.

Scheduling and Customization Tasks

Covers setting day/time, programming first day, copying schedules, and clearing periods.

Temperature Hold and Override Options

Details setting temporary and indefinite temperature holds for flexibility.

Operation

P+I Control Explained

Technical explanation of the proportional-integral control algorithm for precise temperature management.

Functional Settings and Features

Covers fan operation, DST adjustment, and displaying outdoor temperature.

System Operation and Protection

Details operation sequence, equipment protection, startup, and recovery features.

Troubleshooting Guide

Cross Reference

Wiring Diagram

Related product manuals