PARTS DESCRIPTION
USE & OPERATION
1
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a few
seconds the speed will switch to low.
SWING
Press the SWING button until the SWING indicator light is illuminated on the
control panel. The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to change vertical air flow.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER
MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY.
(12)
(1)
(2)
(8)
(7)
(11)
(10)
(3)
(4)
(5)
(6)
(9)
5) Water Level Indicator
6) Casters
7) Water Tank
8) Handle
9) Ice Compartment Lid
10) Rear grill
11) Honeycomb Cooling Media
12) Drain Plug
1) Control Panel
2) Louvers
3) Water Fill Door
4) Power Cord & Plug
COOL
WIND
SPEED
TIMER
SWING
N R S
3 2 1
0.5
1
2
4
LOUVER
MOVEMENT
To Next Page
Loading...
Need help?
General
