Honeywell CL60PM - Control Knob Operation Guide

9
USE
& OPERATION
CONTROL KNOBS
SPEED / ON - OFF
Connect to the power supply and turn the Speed knob. The fan
will start. Change the speed from 1 for Low to 2 for Medium to
3 High. To switch OFF the unit turn the Speed know to "0".
COOL
Turn the Cool knob to ON to start the cooling. It takes a few
minutes to obtain the full effect from this mode.
SWING
Vertical Louvres
Turn the SWING knob to 'ON'. The louvres will begin to move
from right to left automatically.
Horizontal Louvres
Manually adjust the horizontal louvres to change vertical airflow.
0
3
2
1
SPEED
OFF ON
COOL
OFF ON
SWING