75 Series Mobile Computer User Guide 27
1. Point the computer at the bar code. For optimum performance, avoid reflec-
tions by scanning the bar code at a slight angle.
2. Touch and hold the Scan button.
3. Center the aiming beam over the bar code. When the scanner successfully
reads the bar code, the computer beeps, and the Good Read LED turns on
briefly. The bar code information is entered into the application in use.
4. Release the Scan button.
Connect a Bluetooth Scanner
You can connect the computer to a Honeywell Bluetooth scanner, such as the
Granit™ 1981i and 1911i. Make sure that the Bluetooth radio in the computer is
turned on before you try to connect to a scanner. To learn how, see About Bluetooth
Communications on page 84
1. Tap Start > Settings > System > Wireless Scanning.
2. Tap Add Device.
To Next Page
Loading...
