10
USE & OPERATION
CAUTION
Unplug from power when refilling.
Water Fill Door
Water Level Indicator
• Open the water fill door located to the right side of the unit.
Pour water through the water fill door, and fill the tank, till it
reaches the Max. Level.
• Check Max. Level of water on the Water Level Indicator.
Always check water level in the tank before running the
"COOL" function.
• Always make sure water in the tank is above the Min. Water
level mark.
• Running the unit with inadequate water may cause pump
failure.
• Connect a garden hose to the hose adapter securely.
Make sure hose adapter seal washer is evenly set inside the
adapter.
• Connect water supply to the garden hose, and turn on water
supply.
• Water inside the tank will automatically refill once, it reaches
the Min. Level.
• Similarly, the water supply to the tank will stop, once the tank
•
is full, and reaches Max. Level.
The maximum water pressure in Pascal (Bar) units when
connecting the unit to the main water hose is 300 kPa.
Hose Connector
FILL WATER ( Continuous Water Supply Connection)
FILL WATER ( Manually )
To Next Page
Loading...
Need help?
General
