10
USE & OPERATION
FUNCTION BUTTONS
POWER
Press the button to turn the unit on. To turn the unit
off, press the button again. The cooler will start automatically at
medium speed. After a few seconds the speed will switch to low.
SPEED
Press the FAN or SPEED button repeatedly and the speed
will change. The indicator light will show the selected speed.
COOL
To begin cooling the desired area press the COOL
button. The indicator light will come on and the water
pump will operate. You will feel the cooler air after the
Honeycomb Cooling Media is completely wet.
COOL
SPEED
Low Speed
Medium Speed
High Speed
To Next Page
Loading...
Need help?
General
