Honeywell CS10XE User Manual

READ AND SAVE THESE INSTRUCTIONS:
SAFETY RULES
220V AC 50Hz
SHOCK HAZARD
WATER LEVEL INDICATOR
5
When using electrical appliances, basic safety precautions should always be followed:
Always unplug the product before refilling the water tank.
•
Always unplug the appliance from the power source before
cleaning, servicing or relocating the unit.
•
Remove the power cord from the electrical receptacle by
grasping and pulling on the power cord plug-end only, never
pull the cord.
•
DO NOT use the product in areas where gasoline, paint or
other flammable goods and objects are stored.
•
When using the ''COOL'' setting, please check the water tank
to ensure it is full. Operation of this unit on the ''COOL'' setting
with an empty tank may result in damage to the water pump.
•
DO NOT run power cord under carpeting, or cover it with
rugs or runners. Keep the cord away from areas where it
may be tripped over.
•
•
Your cooler runs on 220 Volt AC, 50 Hz current. Check the
household voltage to ensure it matches the appliance's rate
specification.
•
Before operating the product remove it from its packaging
and check it is in good condition.
•
DO NOToperate any product with a damaged cord or plug.
We recommend not using an extension cord with this
appliance.

Honeywell CS10XE Specifications

General

Filter type	Carbon
Noise level	- dB
Integrated timer	Yes
Number of speeds	4
Water tank capacity	10 L
Timer duration (maximum)	7.5 h
Product color	Black

Weight and Dimensions

Depth	342.9 mm
Width	398.8 mm
Height	800.1 mm
Weight	8391 g