To Next PageTo Next Page
Need help?Do you have a question about the Honeywell CT87N and is the answer not in the manual?
General| Type | Non-programmable Thermostat |
|---|---|
| Temperature Control Range | 40°F to 90°F (4°C to 32°C) |
| Stages | 1 Heat/1 Cool |
| Color | White |
| Display | Analog |
| Voltage | 24VAC |
| Mounting | Wall |
| Power Source | Battery (2 x AA) |
Lists all items included in the thermostat package for installation.
Details the necessary tools for installation, such as screwdrivers and a drill.
Emphasizes turning off power and handling mercury notice for old thermostats.
Instructions on labeling wires by terminal letter, ignoring color, and handling loose wires.
Advice for thermostats with 7 or more wires, suggesting a wrong replacement model.
Guide to pulling wires through the base, leveling, and marking screw holes.
Details drilling holes, using anchors, and securing the coverplate/subbase.
Steps for matching labeled wires to terminal letters and securing them.
Guidance on wiring connections, including special notes for R/Rc, O/B, and unused wires.
Explains settings for controlling fan operation based on heating system type.
Instructions for setting cycle rate switches based on heating system type.
Steps for attaching the thermostat to the base and restoring electrical power.
Describes the function of the system switch (Cool, Heat, Off) and fan switch (On, Auto).
Explains how to set the temperature and read the current indoor temperature.
Warns against operating the cooling system when outdoor temperature is below 50°F.
Details Honeywell's warranty, limitations, and customer service contact information.
Provides website and phone number for customer assistance and product support.
